In April 2017 we did the start-up of two 7 Channels futur 8 Rotary Presses at Becker, MN

« Dave Pesola, City of Becker Water/Wastewater Supervisor has commented “In the short time that the Fournier Rotary Presses have been in operation at our facility, Staff has been very pleased with the quality of bio solids produced, the ease of operation, and how quiet the equipment is. The low water usage compared to the belt presses we were using is also an added benefit. This has reduced the humidity in the press room which was contributing to problems with electrical and HVAC equipment.”

In January 2017 we did the start-up of three 6 Channels Rotary Presses at Murfreesboro, TN

They have a total of eight 6 Channels Rotary Presses.

In November 2016 we did the start-up of 2 Channels Rotary Press at Milan, TN

In October 2016 we did the start-up of 6 Channels Rotary Press at North Liberty, IA

Start Up performed by Fournier on Rotary Press including Electrical and Process Start-Up was very well done by Fournier Technicians.

Start-Up and Training was very professional.

Milan Fabijanic | Project Manager

TRICON CONSTRUCTION GROUP

In September 2016 we did the start-up of 1Channel futur 2 Rotary Press at Rock Valley, IA

In June 2016 we did the start-up of a 6 Channels Rotary Press at Billerica, MA. This is their second Rotary Press, the previous one has been in operation since 2006.

In May 2016, we did the start-up of a 6 Channels Rotary Press at Killian Creek, NC. This is their second Rotary Press, the previous one has been in operation since 2010.

In April 2016 we did the start-up of a 4 Channels Rotary Press at Weyauwega, WI.

In March 2016 we did the start-up of a 6 Channels Rotary Press at Greensboro, NC to dewater their ash slurry produced by their incinerator.